Filament, PETG Red, 1.75 mm, 1 kg

  • Polyethylene terephthalate (PETG) is an amorphous thermoplastic of the polyester family
  • Perfect combination of clarity and strength. The clarity of PETG approaches that of Acrylic and impact resistance is close to Polycarbonate
  • Easy to print with a variety of 3D printers

  • Very high strength filament
  • Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
  • Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics.
  • Environmental friendly as it is considered 100% recyclable
  • Very low shrinkage makes printing large flat surfaces a breeze
  • Easily printed on any acrylic, glass, Kapton and other printing platform

Додаткова інформація
additional info filament Pantone codes (273 kb)
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 240°C: 1.27 g/cm3
Melt Flow Index at g/10min, 200°C/ 5kg: 20
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 5mm/min: 50 MPa
Impact Strength: 8.7 KJ/m2
Ensile Break: 120 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole

Системні вимоги
A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament

Кількість в коробці, шт. 8
Об’єм коробки, куб. м0.0342065
Вага коробки, кг11.19
Розмір індивідуальної упаковки ДхШхВ:210x210x90 mm
Розмір коробки ДхШхВ:430x430x185 mm
Країна виробникCN
Пакуванняcolor box

Торгова марка